products

Flange Joint Ductile Iron Pipe External Fusion Bounded Epoxy Coatings

Basic Information
Place of Origin: CHINA
Certification: ISO2531,WRAS,SGS,ISO9001,ISO14001
Model Number: DN80-DN2600mm
Minimum Order Quantity: 1TONS
Packaging Details: WOODEN BOX/PALLET,SHIPPED BY SEA(CONTAINER OR BULK VESSEL),BY AIR ECT.
Delivery Time: 30DAYS
Payment Terms: L/C, T/T
Contact Now
Detail Information
External Coating: Fusion Bonded Epoxy Coating Internal Coating: Cement Lining
Material: Ductile Iron Application: Water
Color: Red Yield (≥ Mpa): ≥300Mpa
High Light:

iso 2531 ductile iron pipe

,

puddle flange pipe


Product Description

Flange Joint Ductile Iron Pipe External Fusion Bounded Epoxy Coatings

 

Flanged Ductile Iron Pipe:

Flanged ductile iron pipe with a range of DN80 to DN 2600.belongs to Ductile iron pipeline systems, including pipes, fittings, accessories and joints, consist of various materials.When used for conveying water intended for human consumption, the materials in contact with the water shall meet the relevant requirements of the national standards or regulations in the country of use with respect to effect on water quality.The lengths of flanged pipes shall be as given in Table 5. Other lengths are available by agreement between the manufacturer and the purchaser.

Samples shall be taken, at the manufacturer’s discretion, either from an integrally cast sample, from a sample attached to the casting, or from a sample cast separately. In the latter case, it shall be cast from the same metal as that used for the casting. If the casting is subjected to heat treatment, the sample shall be subjected to the same heat treatment. The tensile testing machine shall have suitable holders or grips to attach to the test bar ends so as to positively apply the test load axially. The testing machine shall have a force range suitable for testing the bars to failure whilst indicating the load applied. The rate of stressing shall be as constant as possible within the limits of 6 N/mm2 per second to 30 N/mm2 per second. The tensile strength shall be calculated by dividing the maximum force sustained by the test bar by the cross-
sectional area of the test bar before testing. The elongation shall be measured by piecing together the broken parts of the test bar and taking the ratio of the extended gauge length to the original gauge length. Alternatively, the elongation may be measured directly by means of an extensometer.

 

Standardized lengths of flanged pipe

Type of pipe DN Standardized lengths, La
With cast-on flanges 40 to 2600 0,5 or 1 or 2 or 3 or 4
  40 to 500 2 or 3 or 4 or 5
With screwed-on or welded-on flanges 600 to 1000 2 or 3 or 4 or 5 or 6
  1100 to 2600 4 or 5 or 6 or 7
 

Packing: in wooden box or pallet, or in bulk

Shipment: in bulk or container

 

Usage:

Ductile iron pipeline systems, including pipes, fittings, accessories and joints, consist of various materials.When used for conveying water intended for human consumption, the materials in contact with the water shall meet the relevant requirements of the national standards or regulations in the country of use with respect to effect on water quality. When used under the conditions for which they are designed, in permanent or in temporary contact with water intended for human consumption, ductile iron pipes, fittings and their joints shall not have detrimental effects on the properties of that water for its intended use.

 

Our advantages:

 

There are lots of qualified managers and technicians, and a well-trained team of after-sales service, which provides all services of manufacture, package, transportation and installation. We are looking forward to cooperating with friends from abroad and home creating a brighter future.

Contact Details
sales01

Phone Number : 86-371-53378091