|Usage:||Water Supply And Other Application||Keyword:||FBE Coating Pipe|
|Surface:||Customers't Requirement||Special Pipe:||Fluid Pipe|
|Secondary Or Not:||Non-secondary||Type:||Centrifugal Cast|
fusion bond epoxy coated pipe,
fusion bonded epoxy coated steel pipe
FBE Lined Pipe Tensile Strength Min420 With Fusion Bounded Epoxy Coated
FBE Coated Pipe overview:
For pipes centrifugally cast, the minimum wall thickness, emin, shall not be less than 3,0 mm. The nominal wall thickness, enom, is equal to the minimum wall thickness, emin, plus (1,3 + 0,001 DN). For pipes not centrifugally cast, the minimum wall thickness, emin, shall not be less than 4,7 mm. The nominal wall thickness, enom, is equal to the minimum wall thickness, emin, plus (2,3 + 0,001 DN). For centrifugally cast pipes, nominal pipe wall thicknesses for preferred ductile iron pressure classes are given in Table 14. For other pressure classes, as given in Annex C, the user should confirm the availability with the manufacturer.
FBE coated ductile iron pipe is pipe with an interior of epoxy ceramic made of epoxy resin, quartz powder and others with a dry film thickness of more than 1,000μm,and the excellent corrosion resistance electrical insulating property makes it be a preferential position in transporting municipal sewage, reclaimed water, etc.
DUCTILE IRON PIPES SPECIFICATION T-type Joint class k7 k8 K9 class c25 c30 c40 with standard working length(lu=6m)
|1. Pipe Class||k7 k8 k9 c25 c30 c40|
|2. Standard of Pipe||ISO2531, EN545, EN598|
|3. Application||water pipeline,waterworks industry,drinking and raw water,Utilities Water(Water and sewer)|
|5. Effective working Length||5.7m or 6m
6m for bulk shipment and 5.7m for container shipment
|6. Pipe Joint||push-on joint(Tyton joint)|
|7. Chemical composition: (%)||a) C: 3.5 - 4.0
b) Si: 1.9 - 2.6
c) Mn:0.15 - 0.45
c) P: <0.06
d) S: <0.02
|8. Mechanical properties||a) Tensile strength: ≥420MPa
b) Yield strength: ≥300Mpa
c) Hardness: ≤230HB
d) Elongation%: DN80 - 1000 ≥10 DN1200 - 2200 ≥7
|9. Gaskets||NBR rubber, natural rubber, SBR rubber or EPDM rubber ring as per ISO4633|
|10. Packing||bundled with steel belts or in bulk|
|11. Internal Coating||cement mortar lining as per ISO4179|
|12. External Coating||a)Zinc coating:at least 130g/m2 as per ISO 8179
b)Bitumen painting: at least 70um as per ISO 8179
Ductile iron pipes are mainly used for water supply, gas transmission and oil transmission in municipal and industrial and mining enterprises.
Ductile iron pipe with a push-on type connection (joint is composed of spigot and socket with a rubber gasket for sealing).This kind of joint has the reliable sealing,simplicity, sturdiness and watertightness are built into the system by design, the good earthquake resistance and the corrosion resistance is kind of better joint type.
Quick and Easy Assembling :
1. Put the pipes on the construction trench by using manual work or mechanical work
2. Clean the socket inside and spigot as well as clean the rubber gasket ring
3. Lubricant for spigot outface and gasket ring
4. Insert the spigot end to the socket with install mach
Packing: bundled with steel belts or in bulk
Shipment: in bulk or container
Used for water and sewer lines. Ductile cast iron pipe is stronger and easier to tap, requires less support and provides greater flow area compared with pipes made from other materials like PVC, concrete, polyethylene or steel. Ductile Iron Pipe is the most widely-used pipeline product in water supply and water drain/sewage projects.
There are lots of qualified managers and technicians, and a well-trained team of after-sales service, which provides all services of manufacture, package, transportation and installation. We are looking forward to cooperating with friends from abroad and home creating a brighter future.